{"title":"Xray","description":null,"products":[{"product_id":"hex-screw-sfh-m2-5x6-10","title":"Hex Screw SFH M2.5x6 (10)","description":"The XRAY Hex Screw SFH M2.5x6 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This flat-head machine screw uses a hex-drive socket for secure, slip-resistant tightening and loosening with a standard hex driver, and its countersunk flat-head profile allows it to sit flush with the surrounding surface once installed. Sized at M2.5 x 6mm, this screw is commonly used throughout XRAY's touring car and off-road buggy lineups for mounting differential housings, bulkheads, and other chassis hardware where a low-profile, flush-mounted fastener is required. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring a proper thread fit and long-term reliability under vibration and repeated use. This is a practical restock item for XRAY owners performing maintenance, replacing lost or stripped screws, or building up a spares kit ahead of a race weekend. A simple, essential upgrade for keeping your XRAY vehicle properly assembled.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424858149107,"sku":"903256","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ball-bearing-6x13x5-rubber-sealed-oil-2","title":"Ball-Bearing 6x13x5 Rubber Sealed - Oil (2)","description":"The XRAY Ball-Bearing 6x13x5 Rubber Sealed - Oil is a genuine high-speed precision bearing manufactured specifically for XRAY vehicles, sized 6mm ID x 13mm OD x 5mm thickness. Each bearing features special rubber covers that seal out dirt and debris while allowing for easy removal during maintenance, and the bearings are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness and reduced rolling resistance. Compared to standard bearings, these are built with an increased ball count and size for greater load resilience, making them well suited to the higher stresses found in competition use. Sold as a set of 2, this bearing is used on the XRAY NT1 PRO nitro touring platform, though the same bearing size is shared across other compatible XRAY models. Because the side covers are removable, racers can periodically clean and re-oil these bearings rather than replacing them outright, extending their service life. This is an ideal pickup for owners performing routine drivetrain maintenance, replacing worn or contaminated bearings, or upgrading from stock bearings for smoother, more efficient rolling performance. A genuine XRAY component built for consistent, race-ready reliability.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424866472179,"sku":"940613","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ball-bearing-3x8x4-steel-sealed-oil-2","title":"Ball-Bearing 3x8x4 Steel Sealed - Oil (2)","description":"The XRAY Ball-Bearing 3x8x4 Steel Sealed - Oil is a genuine high-quality precision bearing manufactured for XRAY vehicles, sized 3mm ID x 8mm OD x 4mm thickness. These steel-sealed bearings are degreased and lightly oiled with AeroShell Fluid 12 oil, a treatment chosen for maximum smoothness, long service life, tight tolerances, and consistent performance under load. The steel seal design offers strong protection against dirt and debris intrusion, making this bearing well suited to dusty or abrasive racing conditions where a rubber-sealed bearing might wear faster. Sold as a set of 2, this bearing is used on the XRAY X10 2016-spec off-road buggy platform, and the same bearing size is commonly shared across other compatible driveline and steering assemblies in the XRAY lineup. This is a practical choice for racers performing scheduled drivetrain maintenance, replacing bearings that have become gritty or noisy from wear, or building a complete spares kit ahead of a race weekend. As a genuine XRAY part, it's manufactured to the same tolerances as the bearings originally supplied with XRAY kits, ensuring a proper fit and dependable rolling performance once installed.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424876269811,"sku":"930308","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ball-bearing-5x8x2-5-rubber-sealed-oil-2","title":"Ball-Bearing 5x8x2.5 Rubber Sealed - Oil (2)","description":"The XRAY Ball-Bearing 5x8x2.5 Rubber Sealed - Oil is a genuine high-speed precision bearing manufactured specifically for XRAY vehicles, sized 5mm ID x 8mm OD x 2.5mm thickness. Each bearing features special rubber covers that keep out dirt and debris while remaining removable for servicing, and the bearings are degreased and lightly oiled with AeroShell Fluid 12 oil to maximize smoothness and minimize rolling resistance. Compared to standard bearings, these are built with an increased ball count and size for improved load resilience, making them a strong fit for the demands of competitive racing. Sold as a set of 2, this compact bearing size is used across multiple XRAY chassis platforms wherever a low-profile, smooth-rolling bearing is required in the drivetrain or steering assembly. Because the side covers are removable, this bearing can be periodically cleaned and re-oiled rather than replaced outright, helping extend its usable life between rebuilds. This is a solid pickup for racers performing routine maintenance, replacing worn or contaminated bearings, or upgrading from stock hardware for smoother, more consistent rolling performance. A genuine XRAY component built for dependable, race-ready results.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424884461811,"sku":"940508","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"nut-m3-10","title":"Nut M3 (10)","description":"The XRAY Nut M3 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications, finished in black for a clean, factory-matched look. Sized to fit standard M3 threaded hardware, this nut is a common component used throughout XRAY vehicles for securing screws, standoffs, and other chassis and driveline hardware wherever an M3 fastener is called for. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild, replace lost or stripped nuts, or keep a well-stocked hardware bin on hand for race day. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread engagement and reliable clamping force under vibration and repeated use. This part is associated with the XRAY X1 on-road platform, though M3 nuts of this type are broadly compatible across many XRAY chassis wherever standard M3 hardware is specified. A simple, practical restock item for keeping your XRAY vehicle properly assembled and ready to race, this genuine nut is an easy way to avoid downtime from misplaced or worn-out hardware.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424892653811,"sku":"960032","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sfh-m2-5x8-10","title":"Hex Screw SFH M2.5x8 (10)","description":"The XRAY Hex Screw SFH M2.5x8 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This flat-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its countersunk flat-head profile allows it to sit flush with the surrounding surface once installed. Sized at M2.5 x 8mm, this screw is commonly used throughout the XRAY lineup, including on the front and rear differential assemblies of the XB4 touring car platform, wherever a slightly longer flush-mounted fastener than the M2.5x6 variant is required. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. This is a practical restock item for XRAY owners performing maintenance, replacing lost or stripped screws, or building up a spares kit ahead of a race weekend. A simple, essential upgrade for keeping your XRAY vehicle properly assembled.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424900845811,"sku":"903258","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"ball-bearing-5x12x4-rubber-sealed-oil-2","title":"Ball-Bearing 5x12x4 Rubber Sealed - Oil (2)","description":"The XRAY Ball-Bearing 5x12x4 Rubber Sealed - Oil is a genuine high-speed precision bearing manufactured specifically for XRAY vehicles, sized 5mm ID x 12mm OD x 4mm thickness. Each bearing features special rubber covers that seal out dirt and debris while remaining removable for servicing, and the bearings are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness and reduced rolling resistance. Compared to standard bearings, these are built with an increased ball count and size for greater load resilience, suiting the demands of competitive racing conditions. Sold as a set of 2, this bearing size is used across the XRAY XT2, XB2, and XB4 platforms wherever this specific ID\/OD\/thickness combination is called for in the driveline or steering assembly. Because the side covers are removable, racers can periodically clean and re-oil these bearings rather than replacing them outright, extending their service life between rebuilds. This is an ideal pickup for owners performing routine drivetrain maintenance, replacing worn or contaminated bearings, or upgrading from stock bearings for smoother, more efficient rolling performance. A genuine XRAY component built for consistent, race-ready reliability.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424909037811,"sku":"940512","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sfh-m4x12-10","title":"Hex Screw SFH M4x12 (10)","description":"The XRAY Hex Screw SFH M4x12 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This flat-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its countersunk flat-head profile allows it to sit flush with the surrounding surface once installed. Sized at M4 x 12mm, this larger-diameter screw is used across the general XRAY hardware range wherever a heavier-duty flush-mounted fastener is required, such as on chassis plates, bulkheads, or other structural mounting points that see higher stress than smaller M2.5 or M3 hardware. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. This is a practical restock item for XRAY owners performing maintenance, replacing lost or stripped screws, or building up a spares kit ahead of a race weekend.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424917229811,"sku":"903412","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"e-clip-1-5-10","title":"E-Clip 1.5 (10)","description":"The XRAY E-Clip 1.5 is a genuine factory replacement retaining clip manufactured to XRAY's precision hardware specifications. Sized for 1.5mm diameter shafts, this small E-clip (also known as a circlip or retaining ring) is used throughout the XRAY driveline and shock assemblies to secure pins, shafts, and other rotating or sliding components in place while allowing for easy removal during maintenance and rebuilds. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete multiple rebuilds or top off a hardware bin without running short mid-build, which is especially useful since these small clips are easy to lose during disassembly. As a genuine XRAY part, it is manufactured to the same tolerances and spring tension as the original clips supplied with XRAY kits, ensuring a secure, reliable hold once installed. This is a practical restock item for XRAY owners performing driveline or shock maintenance, replacing a clip that was lost or deformed during a previous rebuild, or simply keeping a well-stocked hardware bin on hand for race day. A small but essential part for keeping your XRAY vehicle properly assembled.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424917262579,"sku":"965015","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"nut-m4-with-serrated-flange-10","title":"Nut M4 with Serrated Flange (10)","description":"The XRAY Nut M4 with Serrated Flange is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This M4 nut features an integrated serrated flange that bites into the mounting surface as it's tightened, providing additional resistance to loosening under vibration compared to a standard flat nut, without requiring a separate lock washer. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. This nut is broadly compatible across an extensive range of XRAY platforms, including the NT1, SCX, X4, X4F, XB2, XB4, XT2, and XT4 lines across multiple model years, making it a practical part to keep on hand regardless of which XRAY vehicle you're running. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread engagement and reliable clamping force under the vibration and impacts of regular racing use. A simple, dependable restock item for keeping your XRAY vehicle securely fastened and race-ready.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424925454579,"sku":"960240","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sh-m2-5x4-10","title":"Hex Screw SH M2.5x4 (10)","description":"The XRAY Hex Screw SH M2.5x4 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This button-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its rounded button-head profile provides a low-profile finish while remaining easy to access with a driver during assembly or maintenance. Sized at M2.5 x 4mm, this short screw is used across a wide range of XRAY platforms, including the SCX, XB2, XB4, XT2, and XT4 lines across multiple model years, wherever a compact button-head fastener is specified. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. This is a practical restock item for XRAY owners performing maintenance, replacing lost or stripped screws, or building up a spares kit ahead of a race weekend.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424933646579,"sku":"902254","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"screw-phillips-ss-3-5x45-10","title":"Screw Phillips SS 3.5x45 (10)","description":"The XRAY Screw Phillips SS 3.5x45 is a genuine factory replacement self-tapping screw manufactured to XRAY's precision hardware specifications. This flat-head screw uses a Phillips drive for straightforward assembly with a standard screwdriver, and its self-tapping design allows it to cut its own threads into compatible plastic or composite components without requiring a pre-threaded hole. Sized at 3.5 x 45mm, this longer screw is used on XRAY's larger nitro-powered platforms, including the GTX, GTXE, XB8, XB8E, XT8, and XT8E truggy and buggy lines, typically for securing chassis-mounted components such as fuel tanks or body posts. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring a secure hold and long-term reliability under the vibration and impacts of regular nitro racing use.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424941838579,"sku":"909395","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"nut-m3-10-x10-xp10-scx","title":"Nut M3 (10) - X10\/XP10\/SCX","description":"The XRAY Nut M3 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. Sized to fit standard M3 threaded hardware, this nut is a common component used throughout XRAY vehicles for securing screws, standoffs, and other chassis and driveline hardware wherever an M3 fastener is called for. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild, replace lost or stripped nuts, or keep a well-stocked hardware bin on hand for race day. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread engagement and reliable clamping force under vibration and repeated use. This part is referenced in XRAY's official spare-parts documentation for the X10 and XP10 off-road buggy platforms as well as the SCX short-course truck line, making it a useful part to keep on hand for owners of those vehicles. A simple, practical restock item for keeping your XRAY vehicle properly assembled and ready to race, this genuine nut is an easy way to avoid downtime from misplaced or worn-out hardware during a build or rebuild.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424950030579,"sku":"960030","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"wheels-mounting-hardware-small-4-4","title":"Wheels Mounting Hardware - Small (4+4)","description":"The XRAY Wheels Mounting Hardware - Small is a genuine wheel-mounting hardware set designed for XRAY vehicles that require a smaller-diameter mounting hardware option. The set includes four mounting screws and four matching cone washers with a reduced outer diameter of 4x10mm, specifically sized for wheels with smaller screwhead recesses where the standard-size mounting hardware supplied with the kit cannot fit properly. This makes it a useful pickup for racers running aftermarket or alternate wheel sets that require a lower-profile mounting solution. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as XRAY's original mounting hardware, ensuring secure wheel retention and reliable performance on track. This particular hardware set is associated with the XRAY T1 on-road touring car platform across several model-year variants. It's a practical solution for racers who have run into fitment issues with standard wheel-mounting hardware, or who want to keep a spare set of smaller mounting hardware on hand for wheel changes on race day. A simple, purpose-built part for ensuring your wheels stay securely fastened during competition.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424974541043,"sku":"309311","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"nut-m4-10","title":"Nut M4 (10)","description":"The XRAY Nut M4 is a genuine factory replacement nylock fastener manufactured to XRAY's precision hardware specifications. This M4 nylock nut features a nylon insert that resists loosening under vibration, making it well suited to high-stress mounting points that see repeated impacts during racing. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. This nut is exceptionally broadly compatible, spanning an extensive range of XRAY platforms including the GTX, GTXE, RX8, RX8E, SCX, X1, X8, XB2, XB8, XB8E, XT2, XT8, XT8E, and T2 lines across numerous model years, making it one of the most versatile fasteners in the XRAY hardware catalog and a practical part to keep on hand regardless of which XRAY vehicle you're running. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread engagement and reliable, vibration-resistant clamping force. A dependable restock item for keeping your XRAY vehicle securely fastened and race-ready.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424982733043,"sku":"960040","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"cone-washer-st-3x8x0-5-10","title":"Cone Washer ST 3x8x0.5 (10)","description":"The XRAY Cone Washer ST 3x8x0.5 is a genuine factory replacement washer manufactured to XRAY's precision hardware specifications, sized 3mm ID x 8mm OD x 0.5mm thickness. This cone-shaped washer is designed to seat properly against curved or angled surfaces found on driveline and steering components, distributing clamping force evenly and helping maintain consistent hardware tension under the vibration and impacts of regular racing use. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. This washer size is used across an extensive range of XRAY platforms, including the T-series, X1-series, X10-series, and X12-series lines spanning many model years, making it a practical part to keep on hand for owners of these vehicles. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring a proper fit and reliable performance once installed. A simple, essential component for keeping driveline and steering hardware properly seated and secure.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424982765811,"sku":"963030","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sfh-m3x18-10","title":"Hex Screw SFH M3x18 (10)","description":"The XRAY Hex Screw SFH M3x18 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This flat-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its countersunk flat-head profile allows it to sit flush with the surrounding surface once installed. Sized at M3 x 18mm, this longer screw is used across a wide range of XRAY platforms, including the GTX, SCX, X10, X4, XB2, XB4, XB8, XT2, and XT4 lines, wherever a longer flush-mounted fastener is required to reach through thicker chassis or bulkhead sections. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. A practical restock item for XRAY owners performing maintenance or building up a spares kit ahead of race day.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424990957811,"sku":"903318","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sh-m2x5-10","title":"Hex Screw SH M2x5 (10)","description":"The XRAY Hex Screw SH M2x5 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This button-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its rounded button-head profile provides a low-profile, compact finish suited to XRAY's smaller-scale hardware applications. Sized at M2 x 5mm, this is one of the smaller fasteners in the XRAY hardware catalog, used wherever a compact button-head screw is required on tight assemblies. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. This part is referenced in XRAY's official spare-parts documentation for the X1 on-road touring car platform, making it a useful part to keep on hand for X1 owners performing maintenance or building up a spares kit ahead of a race weekend.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50424999149811,"sku":"902205","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"e-clip-2-3-10","title":"E-Clip 2.3 (10)","description":"The XRAY E-Clip 2.3 is a genuine factory replacement retaining clip manufactured to XRAY's precision hardware specifications. Sized for 2.3mm diameter shafts, this E-clip (also known as a circlip or retaining ring) is used throughout the XRAY driveline and shock assemblies to secure pins, shafts, and other rotating or sliding components in place while allowing for easy removal during maintenance and rebuilds. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete multiple rebuilds or top off a hardware bin without running short mid-build, which is especially useful since these small clips are easy to lose during disassembly. As a genuine XRAY part, it is manufactured to the same tolerances and spring tension as the original clips supplied with XRAY kits, ensuring a secure, reliable hold once installed. This part is referenced in XRAY's official spare-parts documentation for the X1 on-road touring car platform, making it a useful part to keep on hand for X1 owners performing driveline or shock maintenance ahead of a race weekend.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50425007374579,"sku":"965023","price":0.0,"currency_code":"USD","in_stock":true}]},{"product_id":"hex-screw-sh-m3x12-10","title":"Hex Screw SH M3x12 (10)","description":"The XRAY Hex Screw SH M3x12 is a genuine factory replacement fastener manufactured to XRAY's precision hardware specifications. This button-head machine screw uses a hex-drive socket for secure, slip-resistant tightening with a standard hex driver, and its rounded button-head profile provides a low-profile finish while remaining easy to access with a driver during assembly or maintenance. Sized at M3 x 12mm, this screw is used extensively across the XRAY lineup, spanning platforms including the GTX, NT1, RX8, SCX, T-series, X1, X4, X8, X10, X12, XB2, XB4, XB8, XT2, and XT8 lines, making it one of the most broadly compatible fasteners in the XRAY hardware range. Each pack contains 10 pieces, giving racers and mechanics enough spares to complete a full rebuild or top off a hardware bin without running short mid-build. As a genuine XRAY part, it is manufactured to the same tolerances and material quality as the original hardware supplied with XRAY kits, ensuring proper thread fit and long-term reliability under vibration and repeated use. A practical restock item for nearly any XRAY owner's spares kit.","brand":"Xray","offers":[{"title":"Default Title","offer_id":50425023725811,"sku":"902312","price":0.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/cruizinrc.com\/collections\/xray.oembed","provider":"Cruizin' With R\/C's","version":"1.0","type":"link"}