Schelle Racing Part #SCH1278 B6 Chassis Tie Rod Set

Part #SCH1278 - discontinued

B6 Chassis Tie Rod Set
(w/Lunsford Ti Turnbuckle)

The B6 Chassis Tie Rod Set comes with all the hardware you will need to complete the dual pivot setup to go with the SCH1277 X Plate.  You can go the "Do It Yourself" route with spares from your box, or get the Associated B6 shock ends and a Lunsford turnbuckle from us.

Features:

•     2 long B6 shock ends with 2 pivot balls (from ASC91721).  Use the long ends for most cases.
•     The short B6 ends come in the Associated parts set, so we include them in the bag.  You may need them on the B6D for the rearward positions.
•     Mates with SCH1257 Battery Strap* and SCH1277 X Plate* (* sold separately, not included)
•     3mm Lunsford Punisher Turnbuckle, 50mm length.
•     Pivot brace adds low speed traction and steering to let the rear end follow the front through turns.

Pro Installation Tips:

•     Thread each end equally 5 turns onto the turnbuckle, then fine adjust on the car.
•     Use the mount hole on the strap closest to the outer battery position hole you are running.  This reduced bending on the battery posts.
•     Secure the battery tight.  Set the adjustment posts on the chassis to a height at or slightly below the surface of the battery so that the strap is secure against the LiPo case.
•     Set the turnbuckle length so that there is no free-play front to rear.   Typical length between rode ends is 40mm for B6 Laydown and 35.5 mm for B6D standup.